Products description
GPS receiver and cable adaptor for the FUNKE TRT800H transponder
The kit includes an adapter and a GPS receiver.
With its three connections, the adapter can be connected to the transponder TRT800H, to the transponder-connector (TRT800EMxx) and a GPS receiver at the same time.
As a result, the transponder receives the necessary GPS data / coordinates from the GPS receiver and can transmit its position data with SIL0.
The adapter comes between the transponder TRT800H and the transponder connector (TRT800EMxx).
It converts the switched 12Volt output from pin 6 to 5 Volt and connects it to pin 9 of the 9-pin Sub-D connector.
The serial interface is brought out on pin 2 Tx and pin 3 Rx.
Suitable for ‘dry’ indoor installation
This product is compatible with:
A product slider follows - navigate to the individual items using the Tab key.
Sale
TRT800H-LCD Transponder f.u.n.k.e.
Mode-S Transponder VT-01 Class 1
Mode-S Transponder VT-01 Class 2 Garrecht
Sale
complete set AirControl Display + VT-01 Transponder Class 2
Sale
complete set AirControl Display + VT-01 Transponder Class 1
Last viewed:
A product slider follows - navigate to the individual items using the Tab key.
Sale
ADS-B-Out Kit für TRT800H
Windsysteme und Thermik im Gebirge
Ausbildungsnachweis für Segelkunstflug
